|
Model |
JSM6540H |
|
|
Work area (mm) |
680*400 (single red dot pointer) 660*400 (dual red dot pointer) 650*400 (auto focus, with single red dot pointer) |
|
|
Laser tube power |
40W/60W, RECI 80W |
|
|
Engraving speed |
1000mm/s |
|
|
Cutting speed |
400mm/s |
|
|
Engraving depth of acrylic |
2mm |
|
|
Cutting depth of acrylic |
Maximum depth |
10mm(40w) 20mm(60w,80w) |
|
Best depth |
6mm(40w) 12mm(60w,80w) |
|
|
Communication interface |
USB |
|
|
Work table |
Honey comb board, Electric up and down 200mm |
|
|
Minimum forming character |
1*1mm |
|
|
Maximum scanning precision |
0.0254mm |
|
|
Positioning precision |
0.01mm |
|
|
Power supply |
220V (or 110V) +/-10% 50Hz (or 60Hz) |
|
|
Drive mode |
Step motor |
|
|
Software included |
Lasercut |
|
|
Design software |
Coreldraw, Autocad (compatible); Photoshop |
|
|
Picture format supported |
PLT, DXF, BMP, AI (direct); JPG, GIF, PGN, TIF (conversion) |
|
|
Operation system |
Windows 2000/XP/VISTA/7 |
|
|
Engrave curve surface |
Less than 1.5mm |
|
|
Cooler |
Water pump |
|
|
Life time of laser tube |
1000-1500 hours (40W) 3000-4000 hours (60W) 8000-10000 hours (RECI 80W) |
|
|
Certificate |
CE, FDA |
|
